The ZONESUN ZS-MD910K combines metal detection, dynamic checkweighing, automatic rejection and data copying in one continuous inline inspection system. It detects ferrous, non-ferrous and stainless-steel contaminants, checks package weight against preset limits and removes non-conforming products while qualified products continue downstream.
- Integrated metal detection and dynamic checkweighing
- LCD touchscreen metal detector controller
- Automatic push-rod rejection for metal-contaminated, underweight or overweight products
- Data copying and storage for up to 100 preset products
- Maximum inspection speed up to 80 pcs/min
- SUS304 stainless-steel construction
Air supply required: The machine requires an external compressed-air supply of 0.6–1 MPa with a Φ8 mm air inlet.
| Machine Model | ZS-MD910K |
|---|---|
| Machine Screen | LCD Touch Version with Data Copying |
| Power Supply | AC 220 V ±10%, 50 Hz (60 Hz) |
| Rated Power | 0.15 kW |
| Metal Detection Channel | 150 mm (H) × 210 mm (W) |
| Metal Detection Sensitivity | Fe ≥1.0 mm; Cu ≥1.5 mm; SUS ≥2.0 mm |
| Single Weighing Range | ≤3000 g (customizable) |
| Weighing Accuracy | ±0.3 g to ±1 g |
| Minimum Division | 0.1 g |
| Conveyor Speed | 20–90 m/min |
| Maximum Speed | 80 pcs/min |
| Weighing Product Size | <280 mm (L) × 200 mm (W) |
| Reject Method | Push-Rod Type |
| Control System | High-Speed A/D Sampling Controller |
| Preset Product Numbers | 100 |
| Operating Direction | Left infeed, right outfeed when facing the machine |
| External Air Supply | 0.6–1 MPa |
| Air Inlet Interface | Φ8 mm |
| Working Environment | -15°C to 60°C; humidity 30%–95% |
| Machine Material | SUS304 Stainless Steel |
| Weighing Conveyor Belt Size | 400 mm (L) × 210 mm (W) |
| Machine Dimensions | 2400 mm (L) × 855 mm (W) × 1180 mm (H) |
Suitable for continuous inline metal-contamination detection and package-weight inspection of compatible packaged products. The conveyor design can be integrated with compatible upstream and downstream packaging equipment.
The touchscreen control panel lets operators set target weight, tolerance limits and operating parameters while monitoring inspection results and machine status in real time.
The independent LCD touchscreen controller provides direct adjustment of metal-detection sensitivity and inspection settings.
The inspection tunnel detects ferrous, non-ferrous and stainless-steel metal contaminants as products pass through the system.
The dynamic weighing conveyor measures each product during continuous conveying and compares the result with the preset acceptable weight range.
The push-rod reject system automatically removes products with detected metal or weight outside the preset range, allowing qualified products to continue downstream.
