The ZONESUN ZS-90 digital hot foil stamping machine is designed for stamping and embossing on leather, paper, rubber and suitable plastic materials. Choose the heating plate size, voltage and shipping location from the available variants.
Choosing the 10 × 13 cm version for T-slot type: A compatible T plate must be purchased separately and attached to the heating plate before a T-slot can be installed. The T plate and T-slot are not included unless expressly listed in the selected configuration.
Specifications
- Model: ZS-90
- Vertical travel: 16 cm
- Voltage: 110 V or 220 V, according to the selected variant
- Power: 300–500 W
- Pressure range: 15–38 kgf
- Temperature range: 0–350 °C
- Heating plate sizes: 5 × 7 cm, 8 × 10 cm or 10 × 13 cm, according to the selected variant
- Packing size: 42.5 × 28 × 22 cm
- Listed total weight: 6 kg
Temperature and pressing time reference
These values are starting points only. Test with your actual material, foil and die, then adjust as needed.
- Paper foil stamping: 100 °C / 1 s; paper embossing: 300 °C / 3 s
- Leather foil stamping: 100 °C / 1 s; leather embossing: 180 °C / 3 s
- PVC foil stamping: 100 °C / 1 s
- Food embossing: 250 °C / 3 s; leaves embossing: 320 °C / 3 s — confirm suitability for the specific material before use
Digital temperature control
The LCD panel displays set and actual temperatures across the stated 0–350 °C range.
Foil roll holder
The holder supports a foil roll during stamping.
U-shaped die mount
The U-shaped mounting hole allows the die to be installed, adjusted and replaced.
10 × 13 cm heating plate
For T-slot use, purchase a compatible T plate separately, mount it on the heating plate, then install the T-slot. Check the selected configuration for included accessories.
Scaled positioning base
The scale and positioning slider help align the material.
