ZONESUN 80W Manual Electric Bottle Capping Machine

$45.00
Shipping calculated at checkout.
Voltage: 110V
Pre-sale Support Quality Guarantee About Shipping

Introduction:
Bottle height: Not limited; Fitment: For screwing and unscrewing of the screw cap; Rubber insert: 10 - 20 mm; 20 - 30 mm; 30 - 40 mm; 40 - 50 mm; No-load speed: 1000 r/min; Clutch: Adjustable; Cable plug adapter: US plug.
This hand-held electric capping machine is mainly used for screwing and unscrewing of the screw cap. Once the cap is fully tightened, the Bottle Capper will automatically stops rotating head that you can cap the next operation.
Easy to carry, this Hand-held electric capping machine can be easily used to tighten or loosen the cap. The adjustable clutch (adjust strength) can effectively avoid the cap damage and reduce the wear inside the plug.
 one year warranty . if you meet any problems. please contact with us , such as how to use it.

Notice:
please check the picture to see if it can be used, or you can contact with us.

Specifications:
Material: Metal, plastic
Cable length: 5.74' (1.75m)
Electrical source: AC 110V 60Hz
Power consumption: 80w
Work type: Electric Capping
Operation forms: Handheld
Capping diameter: 10-50mm (optional)
Production capacity: 30-90 bottles / minute (depending on proficiency)
Bottle height: Not limited
Torque: 50-25kgf.cm
Fitment: For screwing and unscrewing of the screw cap
Rubber insert: 10 - 20 mm; 20 - 30 mm; 30 - 40 mm; 40 - 50 mm
No-load speed: 1000 r/min
Clutch: Adjustable

Feature: Relieve operator from blisters, fatigue and potential carpal tunnel damage caused by hands and wrists overworking.

Operation: Put chuck onto the cap to be tightened.
Push down switch to active the capper.
The capper starts and tightens the cap.
The capper automatically shuts off while reaching the pre set torque.

Package Content:

1 x Electric Capping Machine
1 x Spring Balancer
4 x Rubber Insert
2 x Chuck
1 x Plug Adapter
1 x M5 Allen Key
1 set x Auxiliary tools