Automatic Screw Counting and Packing
The ZONESUN ZS-FSCS04 combines vibratory bowl feeding, photoelectric counting, dispensing, bag forming, heat sealing and cutting for screws, nuts, washers and other small hardware parts. Choose a 2-, 3- or 4-bowl configuration to suit your component combination and packaging requirements.
Configuration note: The supplied product photos and detail graphics show the four-bowl machine. The number of feeding bowls supplied depends on the configuration selected. Standard power supply: single-phase AC 220V, 50Hz.
Features
- Independent bowl counts: Set the required quantity for each feeding bowl to prepare hardware accessory packs.
- Photoelectric counting: Sensors detect falling components and trigger dispensing when the preset quantity is reached.
- Integrated bagging: Automatically forms, fills, heat-seals and cuts bags from suitable roll film.
- Touchscreen adjustment: Set bag length directly on the touchscreen; change the forming unit for a different bag width.
- Adjustable sealing temperature: Independent temperature controls support compatible heat-sealable films.
- Finished bag discharge: A conveyor belt and chute transfer sealed bags for collection.
Applications
Suitable for counting and packaging standard-sized screws, nuts, washers and compatible small hardware components for fastener suppliers, hardware manufacturers and assembly kit preparation. Parts should be free of impurities. Feeding bowl and bag configuration should be matched to the actual parts and quantity per bag before ordering.
Specifications
| Model | ZS-FSCS04 |
|---|---|
| Feeding bowl configuration | 2, 3 or 4 vibratory bowls (select above) |
| Voltage | Single-phase AC 220V, 50Hz |
| Air pressure | 0.6–0.8 MPa |
| Counting method | Automatic vibratory feeding with photoelectric / fiber-optic counting |
| Packaging speed | 4–8 bags/min, depending on parts and quantity per bag |
| Packaging film | OPP/CPP and CPP/PE heat-sealable composite films |
| Suitable products | Screws, nuts, washers and compatible small hardware parts |
| Material requirements | Standard sizes, free of impurities |
| Bag-making specification (supplier reference) | 320 mm / 220 mm; customized according to product quantity |
| Bag width | Within 150 mm; adjusted by changing the forming unit |
| Bag length | Adjustable within 200 mm via touchscreen |
| Bag forming | Collar-type former |
| Sealing mode | Back seal |
| Cutting method | Serrated blade |
| Sealing pattern | Vertical mesh and horizontal straight pattern |
| Seal width | 8–10 mm |
The supplied specification sheet and performance figures refer to the illustrated four-bowl configuration. Actual speed depends on the product, quantity per bag and machine setup. Bag styles and special configurations should be confirmed for your application.
