Parameters
- Model: H57
- Votalge: 220V/50Hz
- Power: 500W
- Stamping area: 8*10cm
- Temperature: 0-400°C
- Net weight: 2.5kg
- Gross weight: 3kg
- Package size: 30x13x11cm
Application
Embossed leather, wood products, handicrafts, handbags purses, sticker, stationery, footwear mark,plastic packaging, leather embossed branding, car seats, mobile phone sets, paper invitations, cards, notes, furniture, branding, gilt frames plastic stamping etc.
Note
Handle color ship at random.
This machine has one 4mm diameter hole at the heat plate, contact us to customized mold with stem and screw so that you can install on the machine.
Start with the handheld stamping tool as the base unit.
Customize a logo mold in the required design and size.
Install the custom mold to produce the corresponding stamped logo.
Switch on the power and press SET to enter the temperature setting. Select the required digit, adjust the value with the arrow keys, and press SET again to start. Allow approximately 3 minutes of preheating for leather or 5 minutes for wood. The green display shows the set temperature, while the red display shows the current temperature.
How to operate
This machine has one 4mm diameter hole at the heat plate, contact us to customized mold with stem and screw so that you can install on the machine.
Step 1: Install the die with stem and fix it by screw.
Step 2: Connect the Plug to power (for 110V, a power transformer is needed, this machine is 220V)
Step 3: Pressthe red button to power it on.
Step 4: Press set key to begin to setup the temperature
Step 5: Press < to select single digit
Step 6: Press the last two up and down buttons to adjust the temperature.
Stamping reference temperature
Paper: 85-120°C
Soft plastic: 75-85 °C
Hard plastic: 35-100 °C
Man-made Leather: 75-85 °C
Creasing temperature: cowhide 120-150 °C
Soft PVC: 65-80 °C
Synthetic Leather: 160-180 °C
Wood mark: 350°C
 
 |