Introduction: Bottle height: Not limited; Fitment: For screwing and unscrewing of the screw cap; Rubber insert: 10 - 20 mm; 20 - 30 mm; 30 - 40 mm; 40 - 50 mm; No-load speed: 1000 r/min; Clutch: Adjustable; Cable plug adapter: US plug. This hand-held electric capping machine is mainly used for screwing and unscrewing of the screw cap. Once the cap is fully tightened, the Bottle Capper will automatically stops rotating head that you can cap the next operation. Easy to carry, this Hand-held electric capping machine can be easily used to tighten or loosen the cap. The adjustable clutch (adjust strength) can effectively avoid the cap damage and reduce the wear inside the plug. ZONEPACK one year warranty . if you meet any problems. please contact with us , such as how to use it.
Notice: please check the picture to see if it can be used, or you can contact with us.
Specifications: Material: Metal, plastic Cable length: 5.74' (1.75m) Electrical source: AC 110V 60Hz Power consumption: 80w Work type: Electric Capping Operation forms: Handheld Capping diameter: 10-50mm (optional) Production capacity: 30-90 bottles / minute (depending on proficiency) Bottle height: Not limited Torque: 50-25kgf.cm Fitment: For screwing and unscrewing of the screw cap Rubber insert: 10 - 20 mm; 20 - 30 mm; 30 - 40 mm; 40 - 50 mm No-load speed: 1000 r/min Clutch: Adjustable
Feature: Relieve operator from blisters, fatigue and potential carpal tunnel damage caused by hands and wrists overworking.
Operation: Put chuck onto the cap to be tightened. Push down switch to active the capper. The capper starts and tightens the cap. The capper automatically shuts off while reaching the pre set torque.
1 x Electric Capping Machine 1 x Spring Balancer 4 x Rubber Insert 2 x Chuck 1 x Plug Adapter 1 x M5 Allen Key 1 set x Auxiliary tools